User`s manual

SuperH Family E10A-USB Emulator for Multi-core Microcomputers Section 2 Emulator Functions
R20UT0363EJ0500 Rev. 5.00 Page 19 of 296
Aug 10, 2012
2.6 Stack Trace Function
The emulator uses the information on the stack to display the names of functions in the sequence
of calls that led to the function to which the program counter is currently pointing. This function
can be used only when the load module that has the Dwarf2-type debugging information is loaded.
For the usage of this function, refer to section 6.21 and 7.22 Stack Trace Function.
2.7 User-interrupt Open Function during User Program Break
Some devices to be debugged open all interrupts while executing emulation to users. During a user
program break, it is possible to specify the mode whether or not the interrupt processing is
executed.
2.8 Online Help
An online help explains the usage of each function or the command syntax that can be entered
from the command line window.
Select [Emulator Help] from the [Help] menu to view the emulator help.