User`s manual

SuperH Family E10A-USB Emulator for Multi-core Microcomputers Section 7 Tutorial SH-4A
R20UT0363EJ0500 Rev. 5.00 Page 244 of 296
Aug 10, 2012
The [Status] window displays the following contents.
Figure 7.39 Displayed Contents of the [Status] Window (PC Break)
Note: The items that can be displayed in this window differ according to the product. For the
items that can be displayed, refer to the online help.
7.19 Hardware Break Function
A method is given below in which the address bus condition is set under Ch1 (IA_OA) as hardware
break conditions.
 Select [Eventpoints] from the [Code] submenu of the [View] menu of the High-performance
Embedded Workshop for CPU0. The [Event] window is displayed.
 The PC breakpoint that has been previously set is deleted. Click the [Event] window with the
right-hand mouse button and select [Delete All] from the popup menu to cancel all PC
breakpoints that have been set.
 To set a Ch1 (IA_OA), click the [CPU Event] tab.
Up to ten event points can be independently set as event conditions for the hardware break
conditions on each CPU. In this example, set the hardware break condition for Ch1 (IA_OA).
Note: The number of hardware break conditions differs according to the product. For the number
that can be specified for each product, refer to the online help.