User`s manual

SuperH Family E10A-USB Emulator for Multi-core Microcomputers Section 2 Emulator Functions
R20UT0363EJ0500 Rev. 5.00 Page 9 of 296
Aug 10, 2012
Table 2.1 Emulator Functions (cont)
No. Item Function
5 Performance
measurement function
 Uses a counter in the device to measure the number of
cycles that passes during point-to-point execution.
6 Memory access functions
 Downloading to RAM
 Downloading to flash memory
 Single-line assembly
 Reverse assembly (disassembly)
 Reading of memory
 Writing to memory
 Automatic updating of a display of selected variables during
user program execution
 Fill
 Search
 Move
 Copy
 Monitor (physical address)
7 General/control register
access function
 Reads or writes the general/control registers.
8 Internal I/O register
access function
 Reads or writes the internal I/O registers.*
9 Source-level debugging
function
 Various source-level debugging functions.
10 Command line function
 Supports command input.
 Batch processing is enabled when a file is created by
arranging commands in input order.
11 Help function
 Describes the usage of each function or command syntax
input from the command line window.
Note: The [IO] window displays the contents defined in [SHxxxx.io]. Editing those contents adds
or deletes the registers to be displayed. For the contents to be described as [SHxxxx.io],
refer to reference 6, I/O File Format, in the High-performance Embedded Workshop V.4.09
User’s Manual.
The following directory contains [SHxxxx.io] (xxxx means the name of emulator device
group.):
<High-performance Embedded Workshop folder>:
\Tools\Renesas\DebugComp\Platform\E10A-USBM\xxxx\IOFiles