User`s manual

SuperH Family E10A-USB Emulator for Multi-core Microcomputers Section 2 Emulator Functions
R20UT0363EJ0500 Rev. 5.00 Page 8 of 296
Aug 10, 2012
Table 2.1 Emulator Functions
No. Item Function
1 User program execution
function
 Executes a program with the operating frequency within a
range guaranteed by devices.
 Reset emulation
 Step functions:
Single step (one step: one instruction)
Source-level step (one step: one-line source)
Step over (a break did not occur in a subroutine)
Step out (when the PC points to a location within a
subroutine, execution continues until it returns to the calling
function)
 Synchronized functions:
Synchronized execution (execution by both of the CPUs
proceeds at the same time and is synchronized with
execution by one CPU)
Synchronized step functions. (All of the CPUs execute with
synchronizing the one of stepping for the CPU.)
Synchronized break functions. (All of the CPUs break by
synchronizing the one of a break for the CPU.)
2 Reset function
 Issues a power-on reset from the High-performance
Embedded Workshop to the device during break.
3 Trace functions
 Trace function incorporated in the device
 AUD trace:
Branch trace or memory access trace
 Memory output function of trace data
4 Break functions
 Hardware break condition (conditions and the number of
conditions differ according to the device)
 PC break condition (255 points)
 Forced break function