User`s manual
SuperH Family E10A-USB Emulator for Multi-core Microcomputers Section 6 Tutorial SH-2A
R20UT0363EJ0500 Rev. 5.00 Page 195 of 296
Aug 10, 2012
Note: This dialog box cannot be used in a product that does not support the AUD trace function.
The items that can be set in this window differ according to the product. For details on the
settings for each product, refer to the online help.
The following table shows the options.
AUD Trace Acquisition Mode
Type Mode Description
Realtime trace When the trace information is being generated intensely that
the output from the AUD pin incapable of keeping up, the
CPU temporarily suspends the output of trace information.
Therefore, although the user program is run in real time, the
acquisition of some trace information might not be possible.
Continuous
trace occurs
Non realtime trace When trace information is being generated so intensely that
the output from the AUD pin is incapable of keeping up, CPU
operations are temporarily suspended and the output of trace
information takes priority. In such cases, the realtime
characteristics of the user program are lost.
Trace continue This function always overwrites the oldest trace information
to acquire the latest trace information.
Trace buffer
full
Trace stop When the trace buffer becomes full, the trace information is
no longer acquired. The user program is continuously
executed.
AUD Trace Display Range
Type Description
Start pointer Set the pointer to the start of the region for AUD tracing. The
default is D255.
End pointer Set the pointer to the end of the region for AUD tracing. The
default is D0
Note: The items that can be set in this window differ according to the product. For details on the
settings for each product, refer to the online help.