User`s manual

SuperH Family E10A-USB Emulator for Multi-core Microcomputers Section 1 Overview
R20UT0363EJ0500 Rev. 5.00 Page 5 of 296
Aug 10, 2012
Table 1.2 lists the acceptable operating environments.
Table 1.2 Operating Environments
Item Description
Operating system Windows
®
XP (32-bit version) Windows Vista
®
(32-bit version),
Windows
®
7 (32-bit/64-bit version)
Host computer IBM PC or compatible machine with USB 1.1/2.0 (Full-Speed).
CPU Core 2 Duo (2 GHz), or higher
recommended
Core 2 Duo (3.16 GHz), or
higher recommended
Memory capacity 1 Gbytes or more (at least 10
times the file size of load modules
is recommended)
2 Gbytes or more (at least 10
times the file size of load modules
is recommended)
Hard-disk capacity Installation disk capacity: 600 Mbytes or more. (Prepare an area at
least double the memory capacity (four-times or more recommended)
as the swap area.)
Pointing device such as
mouse
Connectable to the host computer; compatible with Windows
®
XP,
Windows Vista
®
, or Windows
®
7.
Display Monitor resolution: 1024 x 768 or higher
Power voltage 5.0 ± 0.25 V (USB-bus power type)
Current consumption 500 mA (max.)
CD-ROM drive Required to install the High-performance Embedded Workshop for the
emulator or refer to the emulator user’s manual.
Note: Microsoft, Windows, and Windows Vista are either registered trademarks or trademarks of
Microsoft Corporation in the United States and or other countries. All other brand and
product names are trademarks, registered trademarks or service marks of their respective
holders.
1.3 Components
Check that all of the components are present when unpacking the product. For details on the
emulator components, refer to section 1.1 in the additional document, Supplementary Information
on Using the SHxxxx. If all of the components are not present, contact your nearest Renesas
sales office or contact center ([e-mail])