User`s manual

SuperH Family E10A-USB Emulator for Multi-core Microcomputers Section 6 Tutorial SH-2A
R20UT0363EJ0500 Rev. 5.00 Page 188 of 296
Aug 10, 2012
When the setting is completed, the [Event] window will be as shown in figure 6.41.
Figure 6.45 [Event condition] Page
Soon after set the [Combination action (Sequential or PtoP)], Ch1 (IA_OA_DT_CT) or Ch2
(IA_OA_DT) will be invalid. Select Ch1 (IA_OA_DT_CT) or Ch2 (IA_OA_DT) individually,
and click the [Event] window with the right-hand mouse button and select [Enable].
Note: The items that can be displayed in this dialog box differ according to the product. For the
items that can be displayed, refer to the online help.
 Set the program counter and stack pointer values (PC = H’00000800 and R15 = H’FFF90000)
that were set in section 6.8, Setting Registers, in the [Register] windows of the High-
performance Embedded Workshops for CPU0 and CPU1. Click on the [Go] buttons of both
High-performance Embedded Workshops.
 If program execution is failed, reset the device and execute again the procedures above.