User`s manual

SuperH Family E10A-USB Emulator for Multi-core Microcomputers Section 6 Tutorial SH-2A
R20UT0363EJ0500 Rev. 5.00 Page 187 of 296
Aug 10, 2012
6.19.1 Setting the Sequential Break Condition
The emulator has sequential break functions.
Set hardware break conditions as follows:
Ch1 (IA_OA_DT_CT): A break condition is satisfied immediately after address H'00101050 is
accessed.
Ch2 (IA_OA_DT): A break condition is satisfied immediately after address H'00101042 is
accessed.
Follow the setting method described in the previous section.
To set these breakpoints as sequential:
 Select [Combination action (Sequential or PtoP)] from the popup menu by clicking the [Event]
window with the right-hand mouse button. The [Combination action (Sequential or PtoP)]
dialog box will open.
Figure 6.44 [Combination action (Sequential or PtoP)] Dialog Box
Note: The items that can be displayed in this dialog box differ according to the product. For the
items that can be displayed, refer to the online help.
 Select [Break: Ch2-1] and click on the [OK] button.