User`s manual

SuperH Family E10A-USB Emulator for Multi-core Microcomputers Section 6 Tutorial SH-2A
R20UT0363EJ0500 Rev. 5.00 Page 179 of 296
Aug 10, 2012
The PC breakpoint that has been set is displayed in the [Event] window.
Figure 6.37 [Event] Window (PC Breakpoint Setting)
Note: The items that can be displayed in this window differ according to the product. For the
items that can be displayed, refer to the online help.
To stop the tutorial program at the PC breakpoint, the following procedure must be executed:
 Set the program counter and stack pointer values (PC = H’00000800 and R15 = H’FFF90000)
that were set in section 6.8, Setting Registers, in the [Register] window of the High-
performance Embedded Workshops for CPU0 and CPU1. Click the [Go] button in the High-
performance Embedded Workshops for either CPU0 or CPU1.
 If program execution is failed, reset the device and execute again the procedures above.