User`s manual

SuperH Family E10A-USB Emulator for Multi-core Microcomputers Section 6 Tutorial SH-2A
R20UT0363EJ0500 Rev. 5.00 Page 177 of 296
Aug 10, 2012
6.18 Break Function
The emulator has PC and hardware break functions. With the High-performance Embedded
Workshop, a PC breakpoint can be set using the [Breakpoint] sheet of the [Event] window, and a
hardware break condition can be set using the [Event condition] sheet.
An overview and setting of the break function are described below.
6.18.1 PC Break Function
The emulator can set up to 255 PC breakpoints. Other methods for setting a PC breakpoint than in
section 6.8, Setting a PC Breakpoint, are described below.
 Select [Eventpoints] from the [Code] submenu of the [View] menu in the High-performance
Embedded Workshop for CPU1. The [Event] window is displayed.
 Select the [Breakpoint] sheet.
Figure 6.35 [Event] Window (Before PC Breakpoint Setting)