User`s manual

SuperH Family E10A-USB Emulator for Multi-core Microcomputers Section 6 Tutorial SH-2A
R20UT0363EJ0500 Rev. 5.00 Page 176 of 296
Aug 10, 2012
6.17 Forced Breaking of Program Executions
The High-performance Embedded Workshop can force a break in the execution of a program.
 Cancel all breaks.
 To execute the remaining sections of the main function, select [Go] from the [Debug] menu in
the High-performance Embedded Workshop for CPU1, or the [Go] button on the toolbar.
Figure 6.33 [Go] Button
 The program goes into an endless loop. To force a break in execution, select [Halt] from the
[Debug] menu of the High-performance Embedded Workshop for CPU1, or click on the
[STOP] button on the toolbar. Since synchronized stepping is enabled (All debuggers
synchronized, Step check box under Synchronization options), the High-performance
Embedded Workshops for CPU0 and CPU1 will break at the same time.
Figure 6.34 [STOP] Button