User`s manual

SuperH Family E10A-USB Emulator for Multi-core Microcomputers Section 1 Overview
R20UT0363EJ0500 Rev. 5.00 Page 1 of 296
Aug 10, 2012
Section 1 Overview
The E10A-USB emulator (hereafter referred to as the emulator) is a support tool for developing
the hardware and software of application systems to run on Renesas original microcomputers.
The main unit of the emulator is connected, through the dedicated debugging interface, to the user
system. The user system can be debugged under the conditions similar to the actual application
conditions. The emulator enables debugging anywhere indoors or out. The host computer for
controlling the emulator must be an IBM PC compatible machine with USB 1.1/2.0 (Full-Speed).
The High-performance Embedded Workshop provides a graphical user interface that eases the
development and debugging of applications written in the C/C++ programming languages or
assembly language for Renesas microcomputers. Its aim is to provide a powerful yet intuitive way
of accessing, observing and modifying the debugging platform on which the application is
running.
Figure 1.1 shows the system configuration using the emulator.
High-performance
Embedded Workshop
CD-R
R ENESAS
USB I
/F
E10A
User system interface cable
(38 pins or 14 pins)
Multi-core microcomputer
Host computer (with USB interface)
Connected to
the USB connector
Connected to
the USB connector
E10A-USB emulator
USB cable (1.5 m)
User system connector
User system
Figure 1.1 System Configuration with the Emulator