User`s manual

SuperH Family E10A-USB Emulator for Multi-core Microcomputers Section 5 Debugging
R20UT0363EJ0500 Rev. 5.00 Page 122 of 296
Aug 10, 2012
Select the AUD trace conditions from the [Trace Settings] when the AUD function is selected.
[Branch trace] : Trace information is acquired by the branch source and the branch
destination as conditions.
[Window trace] : Window trace functions. Memory access information is acquired
within the specified area.
[Channel A] : Set whether acquire the
window trace information from
channel A or not.
[Channel B] : Set whether acquire the
window trace information from
channel B or not.
[Software trace] : Software trace functions. Trace is acquired with the software trace
instructions.
When checking on the [Branch trace] of the [Trace settings], select the acquisition branch
conditions.
[Acquire normal branch instruction trace] : Specify the normal branch as
the branch conditions.
[Acquire subroutine instruction trace] : Specify the subroutine
branch as the branch
conditions.
[Acquire exception branch instruction trace] : Select the exception branch.
When checking on the [Window trace] of the [Trace settings], set the conditions for [Channel A] and
[Channel B] of the [Window trace] group box.
[Channel A] : Set the conditions to acquire the AUD trace.
[Read/Write] : Sets tracing of read or write access or both.
[Read] : Trace information is acquired
on reading.
[Write] : Trace information is acquired
on writing.
[Read/Write] : Trace information is acquired
on reading and writing.
[Start address] : Sets an address range for the tracing of data
access. The start address is set here.
[End address] : Sets an address range for the tracing of data
access. The end address is set here.