User`s manual

SuperH Family E10A-USB Emulator for Multi-core Microcomputers Section 5 Debugging
R20UT0363EJ0500 Rev. 5.00 Page 111 of 296
Aug 10, 2012
[Data] Indicates the accessed data
When [Type] is S_TRACE, this is the value of the variable x of the trace(x) function
[PPC] Output of the performance counter
[Instruction] Instruction mnemonic
[Source] C/C  or assembler source code
[Label] Label information
It is possible to hide any column not necessary in the [Trace] window. Selecting a column you want to
hide from the popup menu displayed by clicking the right-hand mouse button on the header column hides
that column. To display the hidden column, select the column from the said popup menu again. Dragging
the column with the mouse can change the display order.
5.7.3 Specifying Trace Acquisition Conditions
The capacity of the trace buffer is limited. When the buffer becomes full, the oldest trace
information is overwritten. Setting the trace acquisition condition allows acquisition of useful trace
information and effective use of the trace buffer.
The trace acquisition condition is set in the [Acquisition] dialog box that is displayed by selecting
[Acquisition…] from the popup menu.
Whether information displayed in dialog boxes and the details of settings apply per CPU or are
common to the CPUs differs with the device in use.
The dialog box below is for a device where the settings are common to the CPUs.
For specifications of the various devices, refer to the additional document, Supplementary
Information on Using the SHxxxx or the online help.