User`s manual

SuperH Family E10A-USB Emulator for Multi-core Microcomputers Section 5 Debugging
R20UT0363EJ0500 Rev. 5.00 Page 106 of 296
Aug 10, 2012
5.6.27 Viewing the Source Line for Event Conditions
Select an event condition and choose [Go to Source] from the popup menu to open the [Source] or
[Disassembly] window at the address of the event condition. The [Go to Source] menu is only
available when one event condition that has the corresponding source file is selected.
5.7 Viewing the Trace Information
For the description on the trace function, refer to section 2.2, Trace Functions.
5.7.1 Opening the [Trace] Window
To open the [Trace] window, choose [View -> Code -> Trace] or click the [Trace] toolbar button
(
).
5.7.2 Acquiring Trace Information
The pop up menu of the [Trace window] has a [Settings…] item. If the [Settings…] item is selected,
the [Acquisition] dialog box will be displayed. If [I-Trace] is selected as the [Trace Type] in this
dialog box, the trace information will be acquired by using the internal trace function.
The acquired trace information is displayed in the [Trace] window.
Figure 5.20 [Trace] Window (I-Trace)
This window displays the following trace information items:
[PTR] Pointer to a location in the trace buffer (+0 for the last executed instruction)