User`s manual

SuperH Family E10A-USB Emulator for Multi-core Microcomputers Section 5 Debugging
R20UT0363EJ0500 Rev. 5.00 Page 101 of 296
Aug 10, 2012
[Condition] An address that the breakpoint is set
Address = Program counter (Corresponding file name, line, and symbol name)
[Action] Operation of the emulator when a break condition is satisfied
Break: Breaks program execution
Notes 1. PC breakpoints can only be set when all of synchronized execution, synchronized
stepping, and synchronized breaks have been selected.
2. The details of settings differ from product to product. Refer to the online help system
for details on the settings for particular products.
When a breakpoint is double-clicked in this window, the [Breakpoint] dialog box is opened and
break conditions can be modified.
A popup menu containing the following options is available by right-clicking within the window.
5.6.5 Add
Sets breakpoints. Clicking this item will open the [Breakpoint] dialog box and break conditions can
be specified.
5.6.6 Edit
Only enabled when one breakpoint is selected. Select a breakpoint to be edited and click this item.
The [Breakpoint] dialog box will open and break conditions can be changed.
5.6.7 Enable
Enables the selected breakpoint(s).
5.6.8 Disable
Disables the selected breakpoint(s). When a breakpoint is disabled, the breakpoint will remain in the
list; when specified conditions have been satisfied, a break will not occur.
5.6.9 Delete
Removes the selected breakpoint. To retain the details of the breakpoint but not have it cause a
break when its conditions are met, use the Disable option (see section 5.6.8, Disable).