User`s manual

SuperH Family E10A-USB Emulator for Multi-core Microcomputers Section 5 Debugging
R20UT0363EJ0500 Rev. 5.00 Page 96 of 296
Aug 10, 2012
5.4.5 Monitoring Variables
Using the [Watch] window refers to the value of any variables.
When the address of the variable registered in the [Watch] window exists within the monitoring
range that has been set by the Monitor function, the value of the variable can be updated and
displayed.
This function allows checking the content of a variable without affecting the realtime operation.
5.4.6 Hiding the [Monitor] Window
When using the Monitor function to monitor the value of a variable from the [Watch] window, hide
the [Monitor] window for the effective use of the screen.
The current monitoring information is listed as the submenu when selecting [Display -> CPU ->
Monitor]. The list consists of the [Monitor] window name and the address to start monitoring.
When the left of the list is checked, the [Monitor] window is being displayed.
Selecting items of the [Monitor] window you want to hide from the monitor setting list displays no
[Monitor] window and removes the check mark at the left of the list.
To display the [Monitor] window again, select the hidden the [Monitor] window.
Figure 5.14 Monitor Setting List