User`s manual

SuperH Family E10A-USB Emulator Section 3 Preparation before Use
R20UT0870EJ1000 Rev. 10.00 Page 70 of 292
Aug 10, 2012
(h) The following dialog box is displayed when an incorrect ID code has been input. For
security, the flash memory is completely erased.
Figure 3.59 [ID code error!] Dialog Box
(i) The following dialog box is displayed when the MCU cannot communicate with the
emulator. The MCU may not operate correctly; check the MCU settings.
Figure 3.60 [Boot Failed!] Dialog Box