User`s manual

SuperH Family E10A-USB Emulator Section 3 Preparation before Use
R20UT0870EJ1000 Rev. 10.00 Page 67 of 292
Aug 10, 2012
(c) If the following dialog box is displayed, the emulator’s firmware may not be set up
correctly. Set up the firmware of the device group that is used for the setup tool or
license tool.
Figure 3.52 [The product currently connected] Dialog Box
(d) If the following dialog box is displayed, the version of the firmware in the emulator
may be old. Set up the firmware by using the setup tool.
Figure 3.53 [The version of the emulator firmware is incorrect] Dialog Box