User`s manual

SuperH Family E10A-USB Emulator Section 3 Preparation before Use
R20UT0870EJ1000 Rev. 10.00 Page 22 of 292
Aug 10, 2012
3.2 Emulator Hardware Configuration
As shown in figure 3.2, the emulator consists of an emulator, a USB cable, and a user system
interface cable. The emulator is connected to the host computer via USB 1.1, and also to the USB
port conforming to USB 2.0.
Figure 3.2 Emulator Hardware Configuration (when the 36-pin Type Connector is Used)