User`s manual

SuperH Family E10A-USB Emulator Section 3 Preparation before Use
R20UT0870EJ1000 Rev. 10.00 Page 21 of 292
Aug 10, 2012
Section 3 Preparation before Use
3.1 Emulator Preparation
Unpack the emulator and prepare it for use as follows:
WARNING
READ the reference sections shaded in figure 3.1 before
using the emulator product. Incorrect operation will damage
the user system and the emulator product. The USER
PROGRAM will be LOST.
Section 3
Section 4
Input the user system reset signal
Unpack the emulator
Check the components against the component list
Start the High-performance Embedded Workshop
Turn on the user system
Component list
When the emulator
is used first.
When the emulator
is used for second
time or later.
Reference
Set up the emulator
- Install the emulator's software
(Check the components and register the user information.)
- Insert the emulator
- Set up the main unit of the emulator
Figure 3.1 Emulator Preparation Flow Chart