User`s manual

SuperH Family E10A-USB Emulator Section 2 Emulator Functions
R20UT0870EJ1000 Rev. 10.00 Page 19 of 292
Aug 10, 2012
2.6 Stack Trace Function
The emulator uses the information on the stack to display the names of functions in the sequence
of calls that led to the function to which the program counter is currently pointing. This function
can be used only when the load module that has the Dwarf2-type debugging information is loaded.
For the usage of this function, refer to section 6.20, Stack Trace Function.
2.7 Function for Releasing Interrupts to the User during User Program
Breaks
On some devices, all interrupts are open to the user during the execution of user programs. A
mode setting is available to specify whether or not interrupt processing is executed during breaks
in execution of the user program.
2.8 Online Help
An online help explains the usage of each function or the command syntax that can be entered
from the command line window.
Select [Emulator Help] from the [Help] menu to view the emulator help.