User`s manual

SuperH Family E10A-USB Emulator Appendix B Menus
R20UT0870EJ1000 Rev. 10.00 Page 271 of 292
Aug 10, 2012
Table B.1 GUI Menus (cont)
Menu Option Shortcut
Toolbar
Button Remarks
Debug Debug Sessions… Opens the [Debug Sessions]
dialog box to list, add, or remove
the debug session.
Debug Settings… Opens the [Debug Settings]
dialog box to set the debugging
conditions or download modules.
Reset CPU
Resets the target hardware and
sets the PC to the reset vector
address.
Go F5
Starts executing the user program
at the current PC.
Reset Go Shift + F5
Resets the target microcomputer
and executes the user program
from the reset vector address.
Go To Cursor
Starts executing the user program
at the current PC until the PC
reaches the address indicated by
the current text cursor position.
Set PC To Cursor
Sets the PC to the address at the
row of the text cursor.
Run… Launches the [Run Program]
dialog box allowing the user to
enter the PC or PC breakpoint
during executing the user
program.
Step In F11
Executes a block of user program
before breaking.
Step Over F10
Executes a block of user program
before breaking. If a subroutine
call is reached, then the
subroutine will not be entered.
Step Out Shift + F11
Executes the user program to
reach the end of the current
function.
Step… Launches the [Step Program]
dialog box allowing the user to
modify the settings for stepping.