User`s manual

SuperH Family E10A-USB Emulator Section 6 Tutorial
R20UT0870EJ1000 Rev. 10.00 Page 238 of 292
Aug 10, 2012
The following table shows the options.
Trace Acquisition Mode
Type Mode Description
Realtime trace When trace information is being generated so intensively that
the output from the memory is incapable of keeping up, all
the information may not be output. The user program can be
executed in realtime, but some trace information will be lost.
Continuous
trace occurs
Non realtime trace When trace information is being generated so intensively that
the output from the memory is incapable of keeping up, the
CPU stops operations. The user program is not executed in
realtime.
Trace continue This function always overwrites the oldest trace information
to acquire the latest trace information.
Trace buffer
full
Trace stop When the trace buffer becomes full, the trace information is
no longer acquired. The user program is continuously
executed.
Note: The items that can be set in this window differ according to the product. For details on the
settings for each product, refer to the online help.