User`s manual

SuperH Family E10A-USB Emulator Section 6 Tutorial
R20UT0870EJ1000 Rev. 10.00 Page 235 of 292
Aug 10, 2012
The following table shows the options.
AUD Trace Acquisition Mode
Type Mode Description
Realtime trace When the trace information is being generated intensively
that the output from the AUD pin incapable of keeping up,
the CPU temporarily suspends the output of trace
information. Therefore, although the user program is run in
real time, the acquisition of some trace information might not
be possible.
Continuous
trace occurs
Non realtime trace When trace information is being generated so intensively
that the output from the AUD pin is incapable of keeping up,
CPU operations are temporarily suspended and the output
of trace information takes priority. In such cases, the
realtime characteristics of the user program are lost.
Trace continue This function always overwrites the oldest trace information
to acquire the latest trace information.
Trace buffer
full
Trace stop When the trace buffer becomes full, the trace information is
no longer acquired. The user program is continuously
executed.
Note: The items that can be set in this window differ according to the product. For details on the
settings for each product, refer to the online help.