User`s manual

SuperH Family E10A-USB Emulator Section 2 Emulator Functions
R20UT0870EJ1000 Rev. 10.00 Page 7 of 292
Aug 10, 2012
Section 2 Emulator Functions
This section describes the emulator functions. They differ according to the device supported by
the emulator. For the usage of each function, refer to section 6, Tutorial.
2.1 Overview
Table 2.1 gives a functional overview of the emulator.
For details on the functions of each product, refer to the online help.
Table 2.1 Emulator Functions
No. Item Function
1 User program execution
function
 Executes a program with the operating frequency within a
range guaranteed by devices.
 Reset emulation
 Step functions:
Single step (one step: one instruction)
Source-level step (one step: one-line source)
Step over (a break did not occur in a subroutine)
Step out (when the PC points to a location within a
subroutine, execution continues until it returns to the calling
function)
2 Reset function  Issues a power-on reset from the High-performance
Embedded Workshop to the device during break.
3 Trace functions  Trace function incorporated in the device
 AUD trace function:
Branch trace or memory access trace
 Memory output function of trace data
4 Break functions  Hardware break function (conditions and the number of
conditions differ according to the device)
 PC break function (255 points)
 Forced break function