User`s manual

SuperH Family E10A-USB Emulator Section 6 Tutorial
R20UT0870EJ1000 Rev. 10.00 Page 229 of 292
Aug 10, 2012
Notes: 1. The AUD trace function is not supported for all products. For details on the
specifications of each product, refer to the online help.
2. The types of trace information that can be acquired by an AUD trace function differ
according to the product. For details on the specifications of each product or the
number of acquired branches, refer to the online help.
3. When multiple loops are performed to reduce the number of AUD trace displays, only
the IP counts up according to the product.
 Memory Output Trace Function
This function is used to write the trace result to the specified memory range. The data is read
from the memory range written in the [Trace] window and the result is then displayed. This is
large-capacity trace function that is valid when the AUD pin of the device is not connected to
the emulator.
Note: Some products do not support the memory output trace function. For details on the
specifications of each product, refer to the online help.
6.19.1 Displaying the Trace Window
Select [Trace] from the [Code] submenu of the [View] menu. The result of the acquired trace is
displayed.