User`s manual

SuperH Family E10A-USB Emulator Section 5 Debugging
R20UT0870EJ1000 Rev. 10.00 Page 161 of 292
Aug 10, 2012
[End]: Specify the end value if a range has been set (only available when
[Range] has been selected).
[Set]: Adds a new condition to the current one.
[New]: Creates a new condition.
[Result] button: Obtains the result of statistical information analysis.
[Clear]: Initializes the settings.
[Result] list box: Clears all conditions and results of statistical information analysis.
[Close]: Closes this dialog box. All the results displayed in the [Result] list will
be cleared.
This dialog box allows the user to analyze statistical information concerning the trace information.
Set the target of analysis in [Item] and the input value or character string by [Start] and [End].
Click the [Result] button after setting a condition by pressing the [New] or [Add] button to
analyze the statistical information and display its result in the [Result] list.
Note: In this emulator, only [PTR] can be set as a range. Each of other items must be specified
as a character string. In analysis of statistical information, character strings are compared
with those displayed in the [Trace] window. Only those that completely match are
counted. Note, however, that this test is not case sensitive. The number of blanks will not
be cared either.