User`s manual

SuperH Family E10A-USB Emulator Section 5 Debugging
R20UT0870EJ1000 Rev. 10.00 Page 137 of 292
Aug 10, 2012
5.6.3 Specifying Trace Acquisition Conditions
The capacity of the trace buffer is limited. When the buffer becomes full, the oldest trace
information is overwritten. Setting the trace acquisition condition allows acquisition of useful
trace information and effective use of the trace buffer.
The trace acquisition condition is set in the [Acquisition] dialog box that is displayed by selecting
[Acquisition…] from the popup menu.
The [Acquisition] dialog box has the following pages:
Table 5.1 [Acquisition] Dialog Box Pages
Page Item
[Trace mode] Sets trace acquisition conditions.
[Window trace] Sets window trace acquisition conditions.*
2
[AUD Branch trace] Sets branch conditions acquired by the AUD trace function.*
1
[Branch Trace] Sets branch conditions acquired by the internal trace function.
Notes: 1. This dialog box is not supported by the products that do not support the AUD trace
function.
2. Some products do not support this page. For details, refer to the online help for each
product.