User`s manual

SuperH Family E10A-USB Emulator Section 5 Debugging
R20UT0870EJ1000 Rev. 10.00 Page 135 of 292
Aug 10, 2012
[Data] The data of the generated data access. When [Type] is S_TRACE, value x, a
variable of function Trace(x), is displayed.
[Instruction] Instruction mnemonic
[Repeat] Displayed only when the Repeat filter is used. This item shows the number
of consecutive branch operations.
[Probe] State of the input probe
[Timestamp] Timestamp value
[Source] The C/C++ or assembly-language source program
[Label] Label information
Note: Since the displayed contents differ depending on the product, refer to each product’s
online help. Some MCUs/MPUs supported may not have the AUD trace function.
Some devices to be debugged display the items below. For details on the specifications of each
product, refer to the additional document, Supplementary Information on Using the SHxxxx, or
the online help.
Figure 5.19 [Trace] Window (Type 2)
[PTR] The trace buffer pointer (+0 for the last executed instruction)
[IP] The amount of acquired trace information
[Master] (Bus Master) Type of bus master accessed