User`s manual

SuperH Family E10A-USB Emulator Section 5 Debugging
R20UT0870EJ1000 Rev. 10.00 Page 134 of 292
Aug 10, 2012
[Source] The C/C++ or assembly-language source program
[Label] Label information
Selecting the [Set…] menu in the popup menu of the [Trace] window displays the [Acquisition]
dialog box. When [AUD function] is selected in [Trace Type] within the dialog box, the trace
information is acquired by using the AUD trace function.
Figure 5.18 [Trace] Window (Type 1) (AUD Trace)
This window displays the following trace information items (some of this information will not be
displayed in some products):
[PTR] The trace buffer pointer (+0 for the last executed instruction)
[IP] The amount of acquired trace information
[Type] Type of trace information:
BRANCH: Branch source
DESTINATION: Branch destination
MEMORY: Memory access
S_TRACE: Executed Trace(x) function
LOST: Lost trace information (only in the realtime mode)
CPU-WAIT: CPU was waiting for the output of the trace information
(only in the non-realtime mode)
[Bus] The bus which was being accessed
[R/W] Whether the generated data is associated with read or write access
[Address] Address