User`s manual

SuperH Family E10A-USB Emulator Section 5 Debugging
R20UT0870EJ1000 Rev. 10.00 Page 130 of 292
Aug 10, 2012
[Action] Operation of the emulator when a break condition is satisfied.
Break: Breaks program execution
When a breakpoint is double-clicked in this window, the [Event condition] dialog box is opened
and break conditions can be modified. For details on the [Event condition] dialog box, refer to the
on-line help for each product.
A popup menu containing the following options is available by right-clicking within the window.
5.5.14 Edit...
Only enabled when one event channel is selected. Select a breakpoint to be edited and click this
item. The [Event condition] dialog box will open and break conditions can be changed.
5.5.15 Enable
Enables the selected event channel(s). An event channel that the condition has not been set is not
enabled.
5.5.16 Disable
Disables the selected event channel(s). When an event channel is disabled, a break will not occur
even if specified conditions have been satisfied.
5.5.17 Delete
Initializes the condition of the selected event channel. To retain the details of the event channel but
not have it cause a break when its conditions are met, use the Disable option (see section 5.5.16,
Disable).
5.5.18 Delete All
Initializes conditions of all event channels.