User`s manual

SuperH Family E10A-USB Emulator Section 5 Debugging
R20UT0870EJ1000 Rev. 10.00 Page 129 of 292
Aug 10, 2012
5.5.13 Setting Event Conditions
On the [Event condition] sheet, the settings for event conditions are displayed, modified, and
added.
Figure 5.16 [Event] Window ([Event condition] Sheet)
This window displays and sets the break condition. Since the number of channels for detecting
conditions and the contents to be set differ depending on the product, refer to the on-line help for
each product.
Items that can be displayed in the sheet are listed below.
[Type] Event channel number
[State] Whether the breakpoint is enabled or disabled
Enable: Valid
Disable: Invalid
[Condition] A condition that satisfies a break. The displayed contents differ depending on the
break type.