User`s manual

SuperH Family E10A-USB Emulator Section 5 Debugging
R20UT0870EJ1000 Rev. 10.00 Page 126 of 292
Aug 10, 2012
This window displays and sets the breakpoints. Items that can be displayed in the sheet are listed
below.
[Type] Breakpoint
[State] Whether the breakpoint is enabled or disabled
[Condition] An address that the breakpoint is set
Address = Program counter (Corresponding file name, line, and symbol name)
[Action] Operation of the emulator when a break condition is satisfied
Break: Breaks program execution
When a breakpoint is double-clicked in this window, the [Breakpoint] dialog box is opened and
break conditions can be modified.
A popup menu containing the following options is available by right-clicking within the window.
5.5.5 Add
Sets breakpoints. Clicking this item will open the [Breakpoint] dialog box and break conditions
can be specified.
5.5.6 Edit
Only enabled when one breakpoint is selected. Select a breakpoint to be edited and click this item.
The [Breakpoint] dialog box will open and break conditions can be changed.
5.5.7 Enable
Enables the selected breakpoint(s).