User`s manual

SuperH Family E10A-USB Emulator Section 5 Debugging
R20UT0870EJ1000 Rev. 10.00 Page 118 of 292
Aug 10, 2012
[Name]: Decides the name of the monitor window.
[Options]: Sets monitor conditions.
[Address]: Sets the start address for monitoring.
[Size]: Sets the range for monitoring.
[Access]: Sets the access size to be displayed in the monitor window.
[Auto-Refresh at rate]: Sets the interval for acquisition by monitoring.
[Reading the Initial Value]: Selects reading of the values in the monitored area when the
monitor window is opened.
[Color]: Sets the method to update monitoring and the attribute of colors.
[Change Indicator]: Selects how to display the values that have changed during
monitoring (available when [Reading the Initial Value] has
been selected).
No change: No color change.
Change: Color is changed according to the [Foreground] and
[Background] options.
Gray: Those data with values that have not been changed are
displayed in gray.
Appear: A value is only displayed after changed.
[Foreground]: Sets the color used for display (available when [Change] has
been selected).
[Background]: Sets the background color (available when [Change] has been
selected).
[Mayfly]: A check in this box selects restoration of the color of those
data which have not been updated in a specified interval to the
color selected in the [Background] option. The specified
interval is the interval for monitor acquisition (available when
[Change], [Gray], or [Appear] has been selected).
[Detail]: Not supported in the emulator.