User`s manual

SuperH Family E10A-USB Emulator Section 5 Debugging
R20UT0870EJ1000 Rev. 10.00 Page 112 of 292
Aug 10, 2012
In this window, the following items are shown on the left as line information.
The first column (Source address column): Address information
The second column (Event column): Event information (event condition)
The third column (S/W breakpoint column): PC, bookmark, and breakpoint information
Source address column
When a program is downloaded, an address for the current source file is displayed on the Source
address column. These addresses are helpful when setting the PC value or breakpoints.
Event column
The Event column displays the following item:
: An address condition for the event condition is set. The number of address conditions that can
be set is the same as that of event condition channels at which the address condition can be set,
but it differs depending on the product.
This is also set by using the popup menu.
The bitmap symbol above is shown by double-clicking the Event column. This is also set by using
the popup menu.
Figure 5.4 Popup Menu
Note: The contents of the Event column are erased when conditions other than the address
condition are added to each channel by using the [Edit] menu or in the [Event] window.