User`s manual

SuperH Family E10A-USB Emulator Section 4 Preparations for Debugging
R20UT0870EJ1000 Rev. 10.00 Page 102 of 292
Aug 10, 2012
4.4 Connecting the Emulator
Select either of the following two ways to connect the emulator:
(a) Connecting the emulator after the setting at emulator activation
Select [Debug settings] from the [Debug] menu to open the [Debug Settings] dialog box. It is
possible to register the download module or the command chain that is automatically executed
at activation. For details on the [Debug Settings] dialog box, refer to section 4.3, Setting at
Emulator Activation.
When the dialog box is closed after setting the [Debug Settings] dialog box, the emulator will
automatically be connected.
(b) Connecting the emulator without the setting at emulator activation
Connect the emulator by simply switching the session file to one in which the setting for the
emulator use has been registered.
Figure 4.32 Selecting the Session File
In the list box that is circled in figure 4.32, select the session file name including the character
string that has been set in the [Target name] text box in figure 4.9, [New Project –8/9– Setting the
Debugger Options] dialog box. The setting for using the emulator has been registered in this
session file.
After the session file name is selected, the emulator will automatically be connected. For details
on the session file, refer to section 4.3, Debug Sessions.