User`s manual

SuperH Family E10A-USB Emulator Section 4 Preparations for Debugging
R20UT0870EJ1000 Rev. 10.00 Page 100 of 292
Aug 10, 2012
 To view the session properties
1. Select [Debug -> Debug Sessions…] to display the [Debug Sessions] dialog box (figure
4.28).
2. Select the session you would like to view the properties for.
3. Click the [Properties] button to display the [Session Properties] dialog box (figure 4.30).
Figure 4.30 [Session Properties] Dialog Box
 To make a session read-only
1. Select [Debug -> Debug Sessions…] to display the [Debug Sessions] dialog box (figure
4.28).
2. Select the session you would like to make read-only.
3. Click the [Properties] button to display the [Session Properties] dialog box (figure 4.30).
4. Check the [Read only] check box to make the link read-only. This is useful if you are
sharing debugger-setting files and you do not want data to be modified accidentally.
5. Click the [OK] button.
 To save a session with a different name
1. Select [Debug -> Debug Sessions…] to display the [Debug Sessions] dialog box (figure
4.28).
2. Select the session you would like to save.
3. Click the [Save as…] button to display the [Save Session] dialog box (figure 4.31).
4. Specify the location to save the new file.
5. If you want to export the session file to another location, leave the [Maintain link] check
box unchecked. If you would like the High-performance Embedded Workshop to use this
location instead of the current session location, check the [Maintain link] check box.
6. Click the [Save] button.