Technical information

ROAD
MAP
SELECTION
MAP
R8A66580
R8A66597/ M66596
M66592/ M66591/ M66291
SH7724/ SH7722/ SH7723
H8SX/ 1665/ 1655
SH7262/ SH7264
SH7670/ SH7764
SH7285/ SH7286
SH7763/ SH7760
SH7720/ SH7721
SH7727/ SH7705
SH7216
SH7265/ SH7205/ SH7263/ SH7203
H8SX/1668R/
1668M
H8SX/1658R/
1658M
H8SX/
1653/ 1663/
H8S/2472
H8S/2456R
2456/2454
H8S/2212
2215/2218
M16C/6CM30245
38K0 38K2
USB IP/
ZENER
DIODE
DEVELOPMENT
ENVIRONMENT
EVALUATION
PRODUCTS
EVALUATION
BOARD
ROAD
MAP
SELECTION
MAP
R8A66580
R8A66597/ M66596
M66592/ M66591/ M66291
SH7724/ SH7722/ SH7723
H8SX/ 1665/ 1655
SH7262/ SH7264
SH7670/ SH7764
SH7285/ SH7286
SH7763/ SH7760
SH7720/ SH7721
SH7727/ SH7705
SH7216
SH7265/ SH7205/ SH7263/ SH7203
H8SX/1668R/
1668M
H8SX/1658R/
1658M
H8SX/
1653/ 1663/
H8S/2472
H8S/2456R
2456/2454
H8S/2212
2215/2218
M16C/6CM30245
38K0 38K2
USB IP/
ZENER
DIODE
DEVELOPMENT
ENVIRONMENT
EVALUATION
PRODUCTS
EVALUATION
BOARD
The SH7265 is suitable for the dissemination model of car
audio, car navigation system and the products for
multimedia equipment, and the SH7205 is suitable for the
products of consumer equipment and industrial instrument.
The SH7265/7205 is a 32-bit RISC microprocessor
embedded with 2 ports for a USB Host (2 ports) and
Function conforming to Hi-Speed USB2.0 specifications.
The SH7625/7205 is a multi-core microcontroller product
with two built-in "SH2A-FPUs", and the operation is
available at up to a maximum operation frequency of
200MHz. Since each core individually has FPU, the single
SH7625/7205 product can operate data processing of
industrial instruments or musical devices.
In addition, it has various interfaces and peripheral
functions. The USB module supports all transfer types
based on the USB2.0 specifications with a 10KB FIFO that
can be set at a maximum of 10 Endpoints.
Host and
Function
Hi-Speed
USB2.0
The SH7263 is suitable for the digital audio
equipment such as car audio and home audio,
and the SH7203 is suitable for the industrial
instrument such as sequencer and robot.
The SH7263/SH7203 is a 32-bit RISC microprocessor
embedded with USB Host and Function conforming to
Hi-Speed USB2.0 specifications. In addition to the 200MHz
"SH2A-FPU" core, 16KB cache memory and 80KB internal
RAM, the device features abundant peripheral functions
such as color LCDC, DMAC, audio interface, CDROM
decoder and sampling rate converter. The USB module
complies with all transfer types of USB2.0 specifications
and is capable of setting the 8KB FIFO up to 8 Endpoints.
Hi-Speed USB2.0 Host and Function
SH7260/SH7200 Series
SH7263/SH7203
Host and
Function
Hi-Speed
USB2.0
32
bit
32
bit
R5S72650P200BG ★
R5S72651P200BG ★
R5S72652P200BG ★
R5S72653P200BG ★
R5S72050W200BG ★
PinPart Number Package Package Code
Memory capacity (Byte)
ROM Type*
Supply Voltage
（Vcc/VccQ）
Operating
Temperature (°C)
−40 to 85
−20 to 85
Clock
(MHz)
Cache memory
272 BGA PRBG0272GA-A L 1.1 to 1.3/3.0 to 3.6 20016K 112K
RAM
* F: Flash memory version,, L: ROM-less version, M: Mask ROM version, O: One-time PROM version
*1. One stage of external HUB can be connected (for the Full-Speed function connection via Hi-Speed hub, the pay load of Iso. Transfer corresponds to 188 bytes or less.)
*2. When the Function is used, the Host cannot be used. *3. The number of bytes settable for one pipe. The total doubles when using the double buffer mode. *4. Total number of built-in FIFO.
★New product
USB Host
1 port
USB Function *
1
1 port
Speed
HS/FS
FIFO
2K (Max)*
2
8K (Total)*
3
Endpoint (Pipe)
8 Endpoints
Isochronous
Transfer Supported
Block diagram
SH2A-FPU
RTC
ROM-DEC
BSC
ROM,SRAM,
SDRAM I/F
Cache
（4Way,16KB）
RAM
（64KB＋16KB）
RCAN （2ch）
SCIF
（4ch）
I
2
C bus
（4ch）
MTU2
（16bit×5ch）
CMT
（16bit×2ch）
SSU
（2ch）
D/A
（8bit×2ch）
A/D
（10bit×8ch）
SSI
（4ch）
WDT
LCDC
FLCTL
DMAC
（8ch）
I/O Ports
R5S72630P200FP
R5S72631P200FP
R5S72632P200FP
R5S72633P200FP
R5S72030P200FP
PinPart Number Package Package Code
Memory capacity (Byte)
ROM Type*
Supply Voltage
（Vcc/VccQ）
Operating
Temperature (°C)
Clock
(MHz)
Cache memory
240 QFP QFP3232-240Cu L 1.1 to 1.3/3.0 to 3.6 −40 to 85 20016K 80K
240 QFP QFP3232-240Cu L
1.1 to 1.36/3.0 to 3.6 −20 to 85 200
16K 80K
RAM
* F: Flash memory version, L: ROM-less version, M: Mask ROM version, O: One-time PROM version
*1. When the Function is used, the Host cannot be used. *2. The number of bytes settable for one pipe. The total doubles when using the double buffer mode. *3. Total number of built-in FIFO.
The SH7764 is suitable for the products for digital
audio and multimedia applications such as home
audio equipment and car navigation equipment.
The SH7764 is a high performance microprocessor embedded
with USB Host and Function conforming to Hi-Speed USB2.0
specifications, and an FPU with "SH-4A" core. The operation
is available at up to 324MHz. The CPU supports 583MIPS at
maximum, and the FPU supports single precision and
double-precision calculation, up to 2.3GFLOPS.
The SH7764 allow high-speed processing of audio codec
(WMA/MP3/AAC) and image data (2D/3D), and also, with
hardware support for vector operation and sine/cosine
operation, it allows high-speed 3D graphics processing. The
USB module supports all transfer types based on the USB2.0
specifications with a 5KB FIFO that can be set at a maximum
of 10 Endpoints.
Hi-Speed USB2.0 Host and Function
SH7780 Series
SH7764
Host and
Function
Hi-Speed
USB2.0
32
bit
The SH7670 is suitable for the digital audio equipment
such as DVD recorder, flat-screen television and
audio compo and the industrial instrument such as
sequencer and monitoring camera.
The SH7670 is a 32-bit RISC microprocessor embedded with
USB Host and Function conforming to Hi-Speed USB2.0
specifications. It is embedded with 32-bit CPU core
"SH2A-FPU" and realizes the high processing function of
480MIPS when the maximum operation frequency is 200MHz.
In addition, the Ethernet controller, the host of USB2.0 and
the Function are integrated in one chip for the first time in
Renesas, so the LAN controller that has been required as an
external part and LSI dedicated to USB2.0 can be reduced.
Hi-Speed USB2.0 Host and Function
SH-Ether Series
SH7670
Hi-Speed USB2.0 Host and Function
SH7260 Series
SH7265/SH7205
Host and
Function
Hi-Speed
USB2.0
32
bit
USB Host *
1
1 port
USB Function *
2
1 port
Speed
HS/FS/LS (Host only)
FIFO
2K (Max)*
3
8K (Total)*
4
Endpoint (Pipe)
10 Endpoints
Isochronous
Transfer Supported
Block diagram
UBC
I/O Ports
H-UDI
HIF
BSC
SH2A-FPU
INTC
CPG
Ether MAC
SD I/F
I
2
C
2KB 2KB
Cache
（16KB）
SCIF
（3ch）
DMAC
（8ch）
EDMAC
DMAC
（2ch）
U Memory (32 KB)
SSI （2ch）
CMT （2ch）
R5S76700B200BG
R5S76710B200BG
R5S76720B200BG
R5S76730B200BG
R5S76700D133BG
R5S76710D133BG
R5S76720D133BG
R5S76730D133BG
PinPart Number Package Package Code
Memory capacity (Byte)
ROM Type*
Supply Voltage
（Vcc/VccQ）
Operating
Temperature (°C)
Clock
(MHz)
Cache memory
256 BGA P-LFBGA1717-256 L 1.1 to 1.3/3.1 to 3.5 −20 to 70 20016K 32K
256 BGA P-LFBGA1717-256 L 1.1 to 1.3/3.1 to 3.5 −40 to 85 20016K 32K
RAM
* F: Flash memory version,, L: ROM-less version, M: Mask ROM version, O: One-time PROM version
*1. One stage of external HUB can be connected (for the Full-Speed function connection via Hi-Speed hub, the pay load of Iso. Transfer corresponds to 188 bytes or less.)
*2. When the Function is used, the Host cannot be used. *3. The number of bytes settable for one pipe. The total doubles when using the double buffer mode. *4. Total number of built-in FIFO.
USB Host *
1
1 port
USB Function *
2
1 port
Speed
HS/FS/LS (Host only)
FIFO
2K (Max)*
3
5K (Total)*
4
Endpoint (Pipe)
10 Endpoints
Isochronous
Transfer Supported
Block diagram
SH-4A
324MHz
BSC
ROM, SRAM,
SDRAM
I
2
C
1ch
SCIF
3ch
DMAC
6ch
SRC
2ch
RAM
16KB
Ether
MAC
1ch
SSI
6ch
IDE
controller
1ch
TMU
32bit
6ch
NAND
Flash
I/F
Data
Cache
32KB
I-Cache
32KB
SDHC
I/O
GPIO
MMU
FPU INTC
WDT
H-UDI
2D
Graphic
LCDC
VDC2
Digital
RGB
R5S77640N300BG ★
R5S77640P300BG ★
PinPart Number Package Package Code
Memory capacity (Byte)
ROM Type*
Supply Voltage
（Vcc/VccQ）
Operating
Temperature (°C)
−40 to 85
−20 to 85
Clock
(MHz)
Cache memory
404 BGA PRBG0404GA-A L 1.15 to 1.35/3.0 to 3.6 32432KB+32KB 16K
RAM
* F: Flash memory version, L: ROM-less version, M: Mask ROM version, O: One-time PROM version
*1. One stage of external HUB can be connected (for the Full-Speed function connection via Hi-Speed hub, the pay load of Iso. Transfer corresponds to 188 bytes or less.)
*2. When the Function is used, the Host cannot be used. *3. The number of bytes settable for one pipe. The total doubles when using the double buffer mode. *4. Total number of built-in FIFO.
★：New product
Block diagram
SH2A-FPU
（200MHz）
SH2A-FPU
（200MHz）
BSC
ROM, SRAM,
SDRAM
FLCTL
ATAPI
CAN
（2ch）
SSI
6ch
URAM
32KB
I
Cache
8KB
I
Cache
8KB
D
Cache
8KB
D
Cache
8KB
URAM
64KB
A/D
（10bit×8ch）
SCIF
（6ch）
SSU
（2ch）
RTC
2DG
V-in
V-out
INTC
DMAC
WDT
（ ）
USB Host *
1
2 port
USB Function *
2
1 port
Speed
HS/FS/LS (Host only)
FIFO
2K (Max)*
3
10K (Total)*
4
Endpoint (Pipe)
10 Endpoints
Isochronous
Transfer Supported
(USB-IP equivalent to R8A66597 is mounted)
(USB-IP equivalent to M66596 is mounted)
(USB-IP equivalent to R8A66597 is mounted)
(USB-IP equivalent to R8A66597 is mounted)
15
16
32
bit
Host and
Function
Hi-Speed
USB2.0
Supported
application
Car accessory
Mobile
device
PC peripheral
equipment
OA equipment Industrial
instrument
Digital AV
equipment
Electronic
music instrument
Communication
equipment
Supported
application
Car accessory
Mobile
device
PC peripheral
equipment
OA equipment Industrial
instrument
Digital AV
equipment
Electronic
music instrument
Communication
equipment
Supported
application
Car accessory
Mobile
device
PC peripheral
equipment
OA equipment Industrial
instrument
Digital AV
equipment
Electronic
music instrument
Communication
equipment
Supported
application
Car accessory
Mobile
device
PC peripheral
equipment
OA equipment Industrial
instrument
Digital AV
equipment
Electronic
music instrument
Communication
equipment