User`s manual

Operational Specifications
3.1.4 External Power Supply Connector for SH7211 (J5, J6)
Rev.1.01 Jan 31, 2008
3-7
REJ10J1262-0101
3
3.1.4 External Power Supply Connector for SH7211 (J5, J6)
The M3A-HS11 includes the external power supply connector pins to supply the power source of 3.3V and 1.5V
externally.
When the power is supplied by using this connector, set the power select jumper (JP1 and JP2) to “2-3”.
Figure 3.1.6 shows a pin assignment of power supply connector.
Board
Edge
Top View of the
Component Side
J5
1.5V
12
J6
3.3V
12
Figure 3.1.6 Pin Assignment of Power Supply Connector (J5, J6)
Table 3.1.5 lists a pin assignment of power supply connector (J5) for SH7211.
Table 3.1.5 Pin Assignment of Power Supply Connector (J5)
Pin Signal Name Pin Signal Name
1 +5V 2 GND
Table 3.1.6 lists a pin assignment of power supply connector (J6) for SH7211.
Table 3.1.6 Pin Assignment of Power Supply Connector (J6)
Pin Signal Name Pin Signal Name
1 +3.3V 2 GND