User`s manual

RX62N Group, RX621 Group 4. Library Reference
Description (3/3)
PDL_INTC_VECTOR_CMIA1
8-bit timer TMR
channel 1
Compare match A
PDL_INTC_VECTOR_CMIB1
Compare match B
PDL_INTC_VECTOR_OVI1
Overflow
PDL_INTC_VECTOR_CMIA2
8-bit timer TMR
channel 2
Compare match A
PDL_INTC_VECTOR_CMIB2
Compare match B
PDL_INTC_VECTOR_OVI2
Overflow
PDL_INTC_VECTOR_CMIA3
8-bit timer TMR
channel 3
Compare match A
PDL_INTC_VECTOR_CMIB3
Compare match B
PDL_INTC_VECTOR_OVI3
Overflow
PDL_INTC_VECTOR_DMAC0I
Direct memory
access
controller
Transfer complete or Transfer
escape end
PDL_INTC_VECTOR_DMAC1I
PDL_INTC_VECTOR_DMAC2I
PDL_INTC_VECTOR_DMAC3I
PDL_INTC_VECTOR_EXDMAC0I
External DMAC
Transfer complete or Transfer
escape end
PDL_INTC_VECTOR_EXDMAC1I
PDL_INTC_VECTOR_ERI0
SCI channel 0
Error in data received
PDL_INTC_VECTOR_RXI0
Data received
PDL_INTC_VECTOR_TXI0
Start of next data transfer
PDL_INTC_VECTOR_TEI0
End of data transfer
PDL_INTC_VECTOR_ERI1
SCI channel 1
Error in data received
PDL_INTC_VECTOR_RXI1
Data received
PDL_INTC_VECTOR_TXI1
Start of next data transfer
PDL_INTC_VECTOR_TEI1
End of data transfer
PDL_INTC_VECTOR_ERI2
SCI channel 2
Error in data received
PDL_INTC_VECTOR_RXI2
Data received
PDL_INTC_VECTOR_TXI2
Start of next data transfer
PDL_INTC_VECTOR_TEI2
End of data transfer
PDL_INTC_VECTOR_ERI3
SCI channel 3
Error in data received
PDL_INTC_VECTOR_RXI3
Data received
PDL_INTC_VECTOR_TXI3
Start of next data transfer
PDL_INTC_VECTOR_TEI3
End of data transfer
PDL_INTC_VECTOR_ERI5
SCI channel 5
Error in data received
PDL_INTC_VECTOR_RXI5
Data received
PDL_INTC_VECTOR_TXI5
Start of next data transfer
PDL_INTC_VECTOR_TEI5
End of data transfer
PDL_INTC_VECTOR_ERI6
SCI channel 6
Error in data received
PDL_INTC_VECTOR_RXI6
Data received
PDL_INTC_VECTOR_TXI6
Start of next data transfer
PDL_INTC_VECTOR_TEI6
End of data transfer
PDL_INTC_VECTOR_ICEEI0
I²C bus interface
channel 0
Transfer error or event generation
PDL_INTC_VECTOR_ICRXI0
Data received
PDL_INTC_VECTOR_ICTXI0
Start of next data transfer
PDL_INTC_VECTOR_ICTEI0
End of data transfer
PDL_INTC_VECTOR_ICEEI1
I²C bus interface
channel 1
Transfer error or event generation
PDL_INTC_VECTOR_ICRXI1
Data received
PDL_INTC_VECTOR_ICTXI1
Start of next data transfer
PDL_INTC_VECTOR_ICTEI1
End of data transfer
Return value
True.
Category
Interrupt control
Reference
Remarks
•
The fast interrupt processing is allocated to only one interrupt handler.
•
Open the file r_pdl_user_definitions.h and edit the definition FAST_INTC_VECTOR to give it
the same value as the interrupt vector used in parameter data1.
For example:
#define FAST_INTC_VECTOR PDL_INTC_VECTOR_ADI0
This will direct the compiler to generate the instructions required for a fast interrupt vector.
•
This function uses an interrupt routine to modify the FINTV register. If the user has disabled
interrupts (cleared the ‘I’ bit in the PSW register) in their own code, this function will lock up.
R20UT0084EE0112 Rev.1.12 Page 4-14
July. 16, 2014