User`s manual

RX62N Group, RX621 Group 4. Library Reference
Serial Peripheral
Interface
1
R_SPI_Create
Configure an SPI channel.
2
R_SPI_Destroy
Shutdown an SPI channel.
3
R_SPI_Command
Configure an SPI command.
4
R_SPI_Transfer
Transfer data over an SPI channel.
5
R_SPI_Control
Control an SPI channel.
6
R_SPI_GetStatus
Check the status of an SPI channel.
12-bit Analog to
Digital converter
1
R_ADC_12_Create
Configure the 12-bit ADC unit.
2
R_ADC_12_Destroy
Shut down the ADC unit.
3
R_ADC_12_Control
Start or stop the ADC unit.
4
R_ADC_12_Read
Read the ADC conversion results.
10-bit Analog to
Digital converter
1
R_ADC_10_Create
Configure a 10-bit ADC unit.
2
R_ADC_10_Destroy
Shut down an ADC unit.
3
R_ADC_10_Control
Start or stop an ADC unit.
4
R_ADC_10_Read
Read the ADC conversion results.
10-bit Digital to
Analog converter
1
R_DAC_10_Create
Configure the 10-bit DAC module.
2
R_DAC_10_Destroy
Disable a DAC channel.
3
R_DAC_10_Write
Write data to a DAC channel.
R20UT0084EE0112 Rev.1.12 Page 4-3
July. 16, 2014