User`s manual

RX62N Group, RX621 Group Revision History
Rev. Date
Description
Page Summary
1-11
2-16
2-25
4-4
4-8
4-12
4-16
4-67
4-74
4-75
4-78
4-80
4-85
4-88
4-91
4-92
4-94
4-96
4-104
4-106 to
4-108
4-109
4-111
4-115
4-117
4-119
4-122
4-128
4-130
4-131
4-134
4-137
4-137
4-149
4-154
Added the section on build options.
Removed watchdog references from RTC description.
Removed linked operation configuration from DAC description.
Added a comment regarding function macros.
Corrected name of R_CGC_GetStatus in example.
Text changes in the Module column.
Added support for access exceptions.
Added type casts to parameters in example.
Interrupt option PDL_EXDMAC_IRQ_ESCAPE_END removed. This is now set automatically
when required.
Added type casts to parameters in example.
Changed name and added definition of 2
nd
source string.
Corrected size of StatusValue. Added &DestAddr parameter.
R_DTC_Create: Added a remark for chain-transfer transfer data area.
Added type casts to parameters in example.
R_DTC_Control: Added a remark.
Added type casts to parameters in example.
R_MTU2_Set: Changed the description for parameter data. Updated the first remark.
R_MTU2_Create: Removed option to use PDL_NO_DATA.
R_MTU2_Create: Updated the description for cycle set buffer transfer timing. Removed the
references to pins MTIOCxE and MTIOCxF. U
pdated the description for buffer data transfer.
Added note that PDL_MTU2_ADC_TRIG_B_UP_DISABLE/ENABLE can be selected in other
modes.
R_MTU2_Create: Revised restriction for buffer operation.
Corrected the description for PDL_MTU2_A_IC_CM_IC. Added a remark for changing the
mode.
R_MTU_ControlChannel: Added remark about TCDR and TDDR. Technical Update 64.
R_MTU_ControlUnit: Noted where selections apply only to reset-synchronised and / or
complementary PWM control.
Corrected typo. PDL_MTU2_START_0/1 changed to PDL_MTU2_START_CH_0/1
R_MTU2_ReadChannel: Corrected typo TNCTx to TCNTx #489
Corrected names of defines in example
Added an interrupt priority, which is required since a callback is defined.
R_POE_Control: Added remark to clear pin levels before clearing flag. Technical Update 18.
R_PPG_Create: Updated remarks.
R_TMR_CreateChannel: Updated remarks.
Updated R_TMR_CreateUnit data1 comment.
R_TMR_CreateUnit: Updated remarks.
R_TMR_CreatePeriodic: Updated remarks.
R_TMR_CreateOneShot: Updated remarks.
Corrected name of define in example.
Updated the comment in DMAC / DTC trigger control: add words "or DTC "
Update the Return value for issue mis-describe function return value.
R20UT0084EE0112 Rev.1.12 Revision History-3
July. 16, 2014