User`s manual

RX62N Group, RX621 Group Revision History
Rev. Date
Description
Page Summary
4-212
4-220
4-221
5-4
5-6
5-29
5-31
5-63
5-72
Added a remark.
Added more detail to ADC_10_Create parameter data3.
Added columns for 48 and 12 MHz; Added a remark for simultaneous ADC and DAC use.
Updated the R_IO_PORT_Set examples.
Added an LVD usage example.
Added an RTC usage example.
Added an IWDT usage example.
Added SPI usage examples.
Correction of ADC_10 sample code.
1.00 Jan. 12, 2011.
4-9
4-10
4-46
4-73
4-204
4-207
4-209
Updated the description for A/B pin selection.
Added more details for A/B pin selection.
Set TMR Off as the default.
Added Cluster mode to the Source or Destination option.
Set default options for parameter data3.
Set a default SSL pin option.
Updated the data3 description (for Don’t care data content).
1.01 Jan. 21, 2011.
3-1
4-51
4-54
4-51 to
4-61
4-170
4-171
4-172
5-6
5-6
5-7
Added a section for bit definitions.
Removed the WAIT pin default option. Added the Not Used option.
Removed the bus width default option.
Updated package dependency remarks for BSC.
Removed one external clock option.
Updated the description for parameter data3.
Added columns for 48 and 12 MHz.
Added a section for Low Power consumption.
Updated the example for Software Standby mode.
Updated the example for Deep Software Standby mode.
1.02 Feb. 09, 2011.
4-6
4-64
4-73
Corrected the maximum BCLK output frequency.
Corrected the parameter description of R_DMAC_Create.
Corrected the parameter description of R_EXDMAC_Create.
1.03 Feb. 18, 2011.
4-69
4-77
4-82
Added a software-triggered Stop option.
Added a software-triggered Stop option.
Updated the trigger text.
1.04 Apr. 08, 2011.
4-108
4-130
4-229
4-227 to
4-229
5-18
Added reset-synchronised / complementary PWM control.
Corrected the TMCIx text.
Corrected the R_DAC_Write prototype and data3 description.
Updated pin-package support for DAC_10.
Corrected one R_DMAC_Control parameter
1.10 Oct. 25, 2013
1-1
1-2
1-3 to
1-13
1-7
Added "Not designed for RTOS" note.
Added compiler settings required.
Updated example dialog boxes.
Added details on not including interrupt files, and for peripherals that are not supported.
R20UT0084EE0112 Rev.1.12 Revision History-2
July. 16, 2014