User`s manual

RX62N Group, RX621 Group 2. Driver
These driver functions are used for configuring and controlling the timers.
(16) Compare Match Timer
These driver functions are used for configuring and controlling the timers.
(17) Real-time Clock
These driver functions are used for configuring and controlling the real-time clock timer.
(18) Watchdog Timer
These driver functions are used for configuring and controlling the timer.
(19) Independent Watchdog Timer
These driver functions are used for configuring and controlling the timer.
(20) Serial Communication Interface
These driver functions are used to configure the serial channels and manage the transmission and / or
reception of data across them.
(21) CRC calculator
These driver functions are used for controlling the calculator.
(22) I²C Bus Interface
These driver functions are used for controlling the I²C bus channels.
(23) Serial Peripheral Interface
These driver functions are used for controlling the SPI channels.
(24) 12-bit Analog to Digital Converter
These driver functions are used for configuring the 12-bit ADC unit, controlling the unit and reading the
conversion results.
(25) 10-bit Analog to Digital Converter
These driver functions are used for configuring the 10-bit ADC units, controlling the units and reading
the conversion results.
(26) 10-bit Digital to Analog converter
These driver functions are used for configuring the DAC module and setting the output voltages.
R20UT0084EE0112 Rev.1.12 Page 2-2
July. 16, 2014