User`s manual

RX62N Group, RX621 Group 1. Introduction
1.3.6. Add the library file path
The library file is added to the list used by the linker application.
Use the key sequence Alt, B, R to open the "RX Standard Toolchain" window.
Select the Link/Library tab.
From the "Show entries for :" drop-down menu, select "Library files".
Click on the "Add…" button.
In the "Add library file" window, enter the details as shown:
Click on "OK" to close the window.
Click on "OK" to return to the main HEW window.
R20UT0084EE0112 Rev.1.12 Page 1-10
July. 16, 2014