User`s manual

RX62N Group, RX621 Group 4. Library Reference
Description (3/8)
•
Counter clock source selection. Valid for n = 5 or 11.
PDL_MTU2_CLKU_PCLK_DIV_1 or
PDL_MTU2_CLKU_PCLK_DIV_4 or
PDL_MTU2_CLKU_PCLK_DIV_16 or
PDL_MTU2_CLKU_PCLK_DIV_64 or
Counter TCNTU is supplied by the internal clock
signal PCLK ÷ 1, 4, 16 or 64.
PDL_MTU2_CLKV_PCLK_DIV_1 or
PDL_MTU2_CLKV_PCLK_DIV_4 or
PDL_MTU2_CLKV_PCLK_DIV_16 or
PDL_MTU2_CLKV_PCLK_DIV_64 or
Counter TCNTV is supplied by the internal clock
signal PCLK ÷ 1, 4, 16 or 64.
PDL_MTU2_CLKW_PCLK_DIV_1 or
PDL_MTU2_CLKW_PCLK_DIV_4 or
PDL_MTU2_CLKW_PCLK_DIV_16 or
PDL_MTU2_CLKW_PCLK_DIV_64 or
Counter TCNTW is supplied by the internal clock
signal PCLK ÷ 1, 4, 16 or 64.
•
Counter clearing (U, V and W counters). Valid for n = 5 or 11.
PDL_MTU2_CLEAR_TGRU_DISABLE or
PDL_MTU2_CLEAR_TGRU_ENABLE
Disable or enable clearing of TCNTU by TGRU
compare match or input capture.
PDL_MTU2_CLEAR_TGRV_DISABLE or
PDL_MTU2_CLEAR_TGRV_ENABLE
Disable or enable clearing of TCNTV by TGRV
compare match or input capture.
PDL_MTU2_CLEAR_TGRW_DISABLE or
PDL_MTU2_CLEAR_TGRW_ENABLE
Disable or enable clearing of TCNTW by TGRW
compare match or input capture.
[data4]
Configure the ADC trigger operation.
If multiple selections are required, use "|" to separate each selection.
The default settings are shown in bold. Specify PDL_NO_DATA to use the defaults.
•
ADC conversion trigger control. Valid for n = 0 to 4 or 6 to 10 unless stated otherwise.
PDL_MTU2_ADC_TRIG_TGRA_DISABLE or
PDL_MTU2_ADC_TRIG_TGRA_ENABLE
Disable or enable ADC start requests on a
TGRA compare match or input capture.
PDL_MTU2_ADC_TRIG_TROUGH_DISABLE or
PDL_MTU2_ADC_TRIG_TROUGH_ENABLE
Disable or enable ADC start requests on a
TCNT underflow. Valid for n = 4 or 10 in
complementary PWM mode.
•
Control ADC trigger interrupt skipping. Valid for n = 4 or 10 in complementary PWM mode.
PDL_MTU2_ADC_TRIG_A_TROUGH_INT_SKIP_DISABLE
or PDL_MTU2_ADC_TRIG_A_TROUGH_INT_SKIP_ENABLE
Disable or link interrupt
skipping to ADC trigger
TRGnAN on a TCNT
underflow.
PDL_MTU2_ADC_TRIG_B_TROUGH_INT_SKIP_DISABLE
or PDL_MTU2_ADC_TRIG_B_TROUGH_INT_SKIP_ENABLE
Disable or link interrupt
skipping to ADC trigger
TRGnBN on a TCNT
underflow.
PDL_MTU2_ADC_TRIG_A_CREST_INT_SKIP_DISABLE or
PDL_MTU2_ADC_TRIG_A_CREST_INT_SKIP_ENABLE
Disable or link interrupt
skipping to ADC trigger
TRGnAN on a TGRA
compare match.
PDL_MTU2_ADC_TRIG_B_CREST_INT_SKIP_DISABLE or
PDL_MTU2_ADC_TRIG_B_CREST_INT_SKIP_ENABLE
Disable or link interrupt
skipping to ADC trigger
TRGnBN on a TGRA
compare match.
R20UT0084EE0112 Rev.1.12 Page 4-94
July. 16, 2014