User`s manual

RX62N Group, RX621 Group 1. Introduction
1.3. Using the library within your project
The driver library can be used:
1. Via the PDG graphical utility
PDG can be downloaded from www.renesas.com/pdg
.
The directions for use of the PDG utility are given in the PDG manual.
2. Or added to a project by the user and used stand-alone.
To add the driver library to your project’s build environment, you need to
a) Unzip the RPDL distribution.
b) Copy the required source, header and library files into your project folder.
c) Include the required source files.
d) Add the driver library file to the linked files list.
1.3.1. Unzip the RPDL files
Double-click on the file RPDL_RX62N.exe to unpack the files.
The default location is C:\Renesas\RPDL_RX62N.
1.3.2. Copy the files into your project area
Navigate to where the RPDL files were unpacked.
Double-click on "Copy_RPDL_RX62N.bat" to start the copy process.
R20UT0084EE0112 Rev.1.12 Page 1-3
July. 16, 2014