User`s manual

RX62N Group, RX621 Group 4. Library Reference
Description (2/2)
[data2]
•
Address output control.
The signals are enabled by default. Specify PDL_NO_DATA for no change.
PDL_BSC_A9_A0_DISABLE
Disable the output of the A9 to A0 signals.
PDL_BSC_A9_A4_DISABLE
Disable the output of the A9 to A4 signals.
PDL_BSC_A9_A8_DISABLE
Disable the output of the A9 to A8 signals.
PDL_BSC_A10_DISABLE
Disable the output of the A10 signal.
PDL_BSC_A11_DISABLE
Disable the output of the A11 signal.
PDL_BSC_A12_DISABLE
Disable the output of the A12 signal.
PDL_BSC_A13_DISABLE
Disable the output of the A13 signal.
PDL_BSC_A14_DISABLE
Disable the output of the A14 signal.
PDL_BSC_A15_DISABLE
Disable the output of the A15 signal.
PDL_BSC_A16_DISABLE
Disable the output of the A16 signal.
PDL_BSC_A17_DISABLE
Disable the output of the A17 signal.
PDL_BSC_A18_DISABLE
Disable the output of the A18 signal.
PDL_BSC_A19_DISABLE
Disable the output of the A19 signal.
PDL_BSC_A20_DISABLE
Disable the output of the A20 signal.
PDL_BSC_A21_DISABLE
Disable the output of the A21 signal.
PDL_BSC_A22_DISABLE
Disable the output of the A22 signal.
PDL_BSC_A23_DISABLE
Disable the output of the A23 signal.
•
SDRAM output control
PDL_BSC_SDRAM_PINS_DISABLE or
PDL_BSC_SDRAM_PINS_ENABLE
Enable or disable the SDRAM Pins, except the
DQM1 pin.
PDL_BSC_SDRAM_DQM1_DISABLE or
PDL_BSC_SDRAM_DQM1_ENABLE
Enable or disable the DQM1 pin.
[data3]
•
Error monitoring
PDL_BSC_ERROR_ILLEGAL_ADDRESS_ENABLE or
PDL_BSC_ERROR_ILLEGAL_ADDRESS_DISABLE
Enable or disable illegal address
access detection.
PDL_BSC_ERROR_TIME_OUT_ENABLE or
PDL_BSC_ERROR_TIME_OUT_DISABLE
Enable or disable bus time-out
detection.
[func]
The function to be called when a bus error occurs. Specify PDL_NO_FUNC if not required.
[data4]
The interrupt priority level. Select between 1 (lowest priority) and 15 (highest priority).
This parameter will be ignored if PDL_NO_FUNC is specified for parameter func.
Return value
True if all parameters are valid and exclusive; otherwise false.
Category
Bus Controller
Reference
R_BSC_CreateArea, R_CGC_Set
R20UT0084EE0112 Rev.1.12 Page 4-52
July. 16, 2014