User`s manual

RSK+ RX62N Applications
R20UT0255EG0100 Page 18 of 18
Either type or browse to the location of the CDC project you
have generated and built and then to the host/driver folder.
Press next to install the CDC support.
During the installation process a warning may be displayed as
shown. Please choose “Continue Anyway” to install the driver.
Please review the Microsoft website for details of the
Windows Logo Testing programme.
Windows will then complete the installation of the CDC USB
driver.
An additional COM port will become available to Window Applications. To be able to see the port that has been allocated you can
open the Windows Device Manager window. To do this, go to the start menu and select run. In the dialog displayed type
“devmgmt.msc”. This will open the device manager. Expand the group of serial ports and the installed ports will be listed. When the
Serial Terminal program connects to this COM port
*
, it will receive a repeating message from the RSK saying:
“Renesas USB CDC Sample, Press Switch SW1.”
Pressing SW1 on the RSK will stop this repeating message and will bring up the main menu as shown below.
*
Note that the configuration settings for such things as baud rate and parity are irrelevant for this virtual COM port.
August 26, 2010